Can you use toothpaste to clean headlights?
If you have been driving a long time, you have likely experienced or experienced the annoyance of cloudy, foggy, or blurry headlights. The polycarbonate material that most headlights are made of can be scratched and damaged over time by flying debris, or the sun’s UV rays can destroy the outer layers. But do you know that you can use toothpaste to clean fogged headlights? Yes you heard me well!
This deterioration in headlight is not only uncomfortable, but can also significantly affect visibility at night or in bad weather. There isn’t much you can do to prevent this damage to your car headlights, but there are some basic life hacks you can do to help restore it. In this article, we would look at how to clean your headlights with toothpaste and a few other quick and easy headlight cleaning tips. If you’ve ever wondered how to clean your dim headlights at home, I’m here for you!
When cleaning dull, old headlights, the soiled plastic layer is removed, polished to a new smooth and clear surface and then protected from the sun’s UV rays. There was one product that has been used and popular when it comes to removing the haze from the headlights … it is toothpaste especially the white toothpaste (not the gel toothpaste) Yes, you heard that right.
Recommended: What can expired mouthwash be used for?
Mild abrasives are added to most white toothpastes that can help polish surfaces. Commercial polishing products, on the other hand, work much better on polycarbonate headlamp covers than toothpaste. Novus 2 plastic polish is my personal favorite, followed by Novus 1. The results can be spectacular when used with a buffing attachment on a drill press. Let’s look at how to use toothpaste to clean headlights …
How to use toothpaste to clean headlights
Using toothpaste and a rag is one of the easiest ways to clean up cloudy headlights at home. All you have to do is take a tube of toothpaste and apply it liberally to your headlights. Leave on for a while, scrub and then wash off with water. The mild abrasive properties of your toothpaste will help scrape off the damaged, worn surface and give your headlights a shiny new shine.
Step by step instructions
- Get a toothpaste (regular paste, not gel) and a brush.
- Apply a layer of toothpaste to the headlight so that it is completely covered.
- Brush the light for 3-4 minutes until the white paste turns yellowish.
- Wipe and clean the paste with water and paper towels.
That should restore your foggy headlights. If not, you can try this:
- Get 2 high density sandpaper (say 600 and 1000).
- Moisten the outer surface with water.
- Rub the toothpaste over the headlights and let it sit for about 5 minutes.
- Dampen the sandpaper with the number below and start scrubbing gently over the headlight (be sure to keep it wet).
- Wash off leftovers.
- Now use the higher density sandpaper and do the same thing.
- Wash off the residue and wipe it off with a clean cloth.
Recommended: 5 best mouthwashes for foot baths
That should do the job perfectly.
Please take special care not to rub the sandpaper on the surrounding body parts, as this would damage the paint!
Can you use baking soda and vinegar to clean headlights?
Another lifehack for cleaning dim headlights is using a baking soda and vinegar mixture. Baking soda and vinegar have long been used for cleaning. Before you begin, clean the surface of your headlights with dish soap and then apply a mixture of baking soda and vinegar.
Mix the baking soda and vinegar in a small bowl, then apply it in a circular motion from side to side until your headlight is clean. Baking soda and a damp cloth can also be used to clean dim headlights.
Recommended: Can you use mouthwash to disinfect a cut?
Can hydrogen peroxide clean your car headlights?
Hydrogen peroxide has bleaching properties that can help clean your fogged car headlights and make them brighter. Apply a good amount of hydrogen peroxide solution to your headlights, let them sit for 5-10 minutes, scrub them with a clean cloth, and then rinse them off with water. Your headlights should appear cleaner and clearer!
These are the simple, inexpensive, home repairs to try before going for the last option, which is to replace the headlights !!
Hope these tips help.
Instead of replacing your blurry headlights, toothpaste can be used to keep them clean and clear. Clean your car headlights every three months with white toothpaste and soapy water. This will remove dirt and grease from the surface of your car headlights and keep them from turning yellow or fogging up.
Other good remedies you can use are baking soda mixed with vinegar or hydrogen peroxide. These agents have abrasive properties that can help restore your dim light. Apply a layer of toothpaste, hydrogen peroxide, or baking soda-vinegar mixture to the headlights, then scrub and wipe them with a soft cotton cloth to lighten them. After wiping them, you can wax and care for your car headlights, while as you clean, you make sure a protective layer is applied and in place at the same time
If the lightbulb in the headlight has aged, you will need to take it to an auto repair shop to have it replaced.
The medical information in this article is provided as a resource only. This information does not create a doctor-patient relationship and should not be used as a substitute for professional diagnosis and treatment.
Thank You For Reading!